Control Systems Engineer I
Mitsubishi Heavy IndustriesDesign and commission industrial turbine control systems for Mitsubishi Power Americas, supporting DCS, PLC, and HMI configuration, testing, troubleshooting, and customer training.
खोलें
Mitsubishi Heavy Industries ऊर्जा, लॉजिस्टिक्स, बुनियादी ढाँचे, एयरोस्पेस, रक्षा और औद्योगिक मशीनरी के क्षेत्रों में कार्य करने वाली एक वैश्विक औद्योगिक और विनिर्माण कंपनी है। इसकी प्रौद्योगिकियों में बिजली उत्पादन प्रणालियाँ, स्वचालित लॉजिस्टिक्स उपकरण, हवाई अड्डों और शहरी परिवहन के समाधान तथा CO2 कैप्चर प्रणालियाँ शामिल हैं। कंपनी बड़े पैमाने के विनिर्माण के साथ इंजीनियरिंग विशेषज्ञता को जोड़कर ऐसे बुनियादी ढाँचे और औद्योगिक उत्पाद विकसित करती है, जिनका उद्देश्य परिचालन दक्षता बढ़ाना, पर्यावरणीय लक्ष्यों का समर्थन करना और सार्वजनिक सुरक्षा को मजबूत करना है। इसके तकनीकी कार्यों की व्यापक श्रृंखला उन्नत विनिर्माण, इंजीनियरिंग, परिवहन प्रणालियों, ऊर्जा और रक्षा में करियर तलाशने वाले पेशेवरों के लिए आकर्षक हो सकती है।
Engineer III, Control Systems
Design, test, and commission turbine control systems for Mitsubishi Power clean energy projects. Support plant integration, troubleshooting, customer training, and field operations.
विवरण
- Create and review control system engineering designs.
- Configure, test, maintain, modify, and troubleshoot control system hardware and software.
- Design and implement new control systems and improve existing designs.
- Work with design and operations engineers, purchasing, sales and marketing, and other internal teams.
- Coordinate with clients, suppliers, contractors, project managers, and relevant authorities.
- Oversee vendor selection, bid evaluations, and supplier performance from a technical perspective.
- Maintain compliance with health and safety regulations and quality standards.
- Prepare and review control system specifications and equipment purchasing requests for quotation.
- Configure Mitsubishi Control System HMIs and databases.
- Design control panels, prepare documentation, and support fabrication.
- Develop, configure, test, and troubleshoot control logic and HMI applications.
- Support control system manufacturing and inspection, including Factory Acceptance Tests (FATs).
- Address customer feedback on drawings and documentation.
- Assist with on-site installation and integration of Mitsubishi control systems.
- Support start-up, commissioning, operations, and troubleshooting; identify root causes and implement solutions.
- Report on system conditions, required actions, and results.
- Deliver classroom and on-the-job training on Mitsubishi Control systems.
- Travel overnight by land or air at least 10% of the time.
आवश्यकताएँ
- Hold a bachelor's degree in engineering from a four-year college or university and have at least three years of related experience or training, or an equivalent combination of education and experience.
- Have experience in control disciplines such as advanced process control (APC), distributed control systems (DCS), programmable logic controllers (PLC), OPC/Modbus, and SCADA for power plants.
- Have a solid working knowledge of industrial networking and computer systems, including TCP/IP, subnets, managed switches, firewalls, segmentation, and VLANs.
- Bring hands-on experience with DCS platforms such as DIASYS Netmation, Ovation, DeltaV, 800xA, T3000, or equivalent PLC/DCS platforms.
- Know Modbus (RTU/TCP), OPC DA/UA, and NTP/PTP.
- Have experience with Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT).
- Be able to read and interpret electrical and control system schematics.
- Be familiar with US and international codes and standards, including UL 508A, NFPA 70, NFPA 79, CSA C22.2 / SPE-1000, IEC 60204-1, and NEMA.
- Have experience with control system and panel design, equipment selection, panel layout, I/O assignment, wiring, grounding, and industrial power distribution.
- Know EPLAN Electric P8, EPLAN Pro Panel, AutoCAD Electrical, SOLIDWORKS Electrical Schematic, or equivalent tools.
- Understand gas turbine and combined cycle power plant operations in practice.
- Have experience implementing control logic for gas turbine, combined cycle, and balance of plant systems using Function Block Diagram.
- Be able to develop and interpret control narratives, SAMA diagrams, Cause & Effect matrices, and interlock logic.
- Know version control and change management practices for control logic.
- Have experience with HMI graphic creation tools and High-Performance HMI concepts under ISA-101.
- Have exposure to alarm management concepts and familiarity with ISA-18.2 principles.
- Be aware of industrial control system cybersecurity standards such as NERC CIP and IEC 62443.
लाभ
- Medical, dental, and vision coverage, plus 401(k) matching.
- Professional development programs and advancement opportunities.
- Tuition reimbursement and on-the-job training.
- Paid vacation, sick time, and holidays.
- A positive working environment and culture.
- Employee appreciation programs and events.
संबंधित नौकरियाँ
Monitoring and Diagnostic Insight Engineer
GE Vernova
संयुक्त राज्य$80,000 – $1,20,000 / वर्ष
ऑन-साइटपूर्णकालिकजूनियरमध्य स्तरआवश्यक भाषा: अंग्रेज़ीइंजीनियरAnalyze GE Vernova power-generation fleet data to detect risks and recommend actions that strengthen reliability and asset performance.
खोलें
T2 Monitoring and Diagnostic Insights Engineer, Operability
GE Vernovaसंयुक्त राज्य$89,300 – $1,48,700 / वर्ष
ऑन-साइटपूर्णकालिकमध्य स्तरवरिष्ठआवश्यक भाषा: अंग्रेज़ीइंजीनियरInvestigate complex equipment diagnostics across GE Vernova’s power generation fleet and recommend engineering actions to improve reliability. Support customer outcomes and proactive risk identification across the Americas.
खोलें
Senior Airworthiness Certification Engineer
Boeingसंयुक्त राज्य
अलबामा
एरिज़ोना
कैलिफ़ोर्निया
फ़्लोरिडा
मिसौरी
ओक्लाहोमा
पेंसिल्वेनिया$1,22,400 – $2,31,150 / वर्ष
ऑन-साइटपूर्णकालिकवरिष्ठआवश्यक भाषा: अंग्रेज़ीइंजीनियरAt Boeing, lead airworthiness and software certification for military aircraft programs, including regulatory engagement and compliance strategy. The onsite role supports enterprise aerospace programs and may require travel of up to 25%.
खोलें
Senior Manufacturing Excellence Engineer
CACI International Incसंयुक्त राज्य
कनेक्टिकटफ़्लोरिडा
न्यूयॉर्क
वर्जीनिया$1,05,100 – $2,31,100 / वर्ष
ऑन-साइटपूर्णकालिकवरिष्ठलीडआवश्यक भाषा: अंग्रेज़ीइंजीनियरApply Lean and Six Sigma methods across CACI aerospace and defense manufacturing operations. Lead improvement events and DMAIC projects while supporting smart factory adoption and production-floor problem-solving.
खोलें