General Motors
General Motors
General Motors — көлік құралдарын жобалау, өндіру, тасымалдау және ақпараттық технологиялар салаларында жұмыс істейтін жаһандық автомобиль және өндірістік компания. 1908 жылы құрылған GM нөлдік апат, нөлдік шығарындылар және нөлдік кептеліс жөніндегі өз пайымын жүзеге асыра отырып, мобильділікті дамытуға бағытталған технологияларды әзірлейді. Компанияның халықаралық операциялары инновацияға, тұрақты көлік жүйесіне және автомобиль өнеркәсібінің болашағына назар аударатын ауқымды, пәнаралық командаларды біріктіреді.

Manufacturing Fluid Power Engineer

Design, commission, and improve pneumatic and hydraulic systems used in GM manufacturing. Troubleshoot presses and automation equipment while supporting safe, reliable production.

Сипаттама

  • Lead the design, installation, commissioning, troubleshooting, and improvement of pneumatic, hydraulic, and other fluid-power systems.
  • Specify, integrate, and validate fluid-power systems for presses, die and material handling, automation, and manufacturing equipment.
  • Create and review system architectures, schematics, bills of material, component specifications, calculations, and technical documents.
  • Select and size pumps, motors, cylinders, actuators, valves, manifolds, accumulators, filters, regulators, lubricators, tubing, hoses, and fittings.
  • Assess pressure, flow, force, speed, response time, heat, contamination, leakage, and energy use.
  • Connect fluid-power systems with electrical controls, PLCs, sensors, safety systems, HMIs, and machine sequencing.
  • Support safety functions such as safe stopping, pressure isolation, stored-energy control, guarding interfaces, and lockout energy control.
  • Diagnose pneumatic and hydraulic equipment using schematics, measurement and diagnostic tools, and structured problem-solving.
  • Lead root-cause investigations and corrective actions for equipment failures and recurring downtime.
  • Support equipment installation, supplier build reviews, runoffs, commissioning, debugging, production launch, and acceptance.
  • Use performance and reliability data to improve uptime, cycle time, quality, maintainability, and operating costs.
  • Work with maintenance and operations on preventive and predictive maintenance, inspections, spare parts, and troubleshooting.
  • Review supplier designs and guide suppliers, contractors, plant staff, and engineering support teams.
  • Identify and deliver cost reductions, standardization, design improvements, and energy-efficiency measures.
  • Support Management of Change processes and document, review, test, and implement engineering changes.
  • Keep records of designs, calculations, schematics, equipment changes, validation results, commissioning, and lessons learned.
  • Develop and deliver technical training for maintenance, production, and engineering staff.
  • Direct and advise engineering support staff and project team members.

Талаптар

  • Bachelor's degree in mechanical, electrical, computer, or manufacturing systems engineering, computer science, or equivalent experience.
  • At least 2 years of experience developing and maintaining manufacturing machinery and equipment.
  • Knowledge of mechanics, hydraulics, pneumatics, engineering mechanics, and manufacturing methods engineering.
  • Experience coordinating design and construction work; automotive manufacturing experience is preferred.
  • Experience with project management methods.
  • Familiarity with Microsoft software, including MS Project.
  • Ability to use CAD tools such as AutoCAD, Unigraphics, SOLIDWORKS, Teamcenter, and Teamcenter Visualization.
  • Ability to develop and deliver technical training.
  • Ability to provide work direction and technical guidance.
  • Preferred: Master's degree in a related engineering field or equivalent practical experience.
  • Preferred: At least 5 years of relevant manufacturing machinery and equipment experience.
  • Preferred: At least 3 years supporting industrial equipment, manufacturing systems, machinery, or fluid-power applications.
  • Ability to read pneumatic, hydraulic, mechanical, and electrical drawings, equipment manuals, and bills of material.
  • Experience with structured root-cause analysis and hands-on measurement methods.
  • Experience with proportional or servo-hydraulic systems, pressure-compensated pumps, hydraulic power units, high-pressure circuits, pneumatic motion-control systems, or vacuum applications.
  • Experience selecting fluid-power components, sizing systems, calculating pressure and flow, and improving energy efficiency.
  • Familiarity with NFPA, ISO, SAE, OSHA, and applicable GM machinery-safety requirements.
  • Experience supporting supplier design reviews, equipment runoffs, installation, commissioning, production launch, and plant acceptance.
  • Experience with Microsoft Office, data-analysis tools, or computerized maintenance and asset-management systems.
  • Experience with PLC-controlled machinery, HMIs, sensors, safety circuits, and industrial communication interfaces.
  • Fluid-power, hydraulics, pneumatics, machinery-safety, reliability, or maintenance-engineering training or certification is preferred.
  • Experience leading technical work at supplier build shops or manufacturing facilities is preferred.
  • Candidates with a two-year associate degree in a related technical field and extensive directly relevant industrial fluid-power experience may also be considered.
  • Must not require GM immigration sponsorship now or in the future.
  • Must live within 50 miles of the Warren, Michigan home location.
  • Ability to travel regularly, 25–50%.

Артықшылықтар

  • Medical, dental, and vision coverage
  • Health Savings Account (HSA)
  • Flexible Spending Accounts (FSA)
  • Retirement savings plan
  • Sickness and accident benefits
  • Life insurance
  • Paid vacation and holidays
  • Tuition assistance programs
  • Employee assistance program
  • GM vehicle discounts
  • Relocation benefits may be available to eligible candidates

Ұқсас жұмыс орындары

NuScale Power

Instrumentation and Controls Engineer III

NuScale Power

Design safety-related digital instrumentation and control systems for NuScale Power’s nuclear technology. Coordinate engineering work, supplier activities, testing, and designs that meet NRC requirements.

Ашу
Leidos

Junior Mobile Device Management Engineer at Leidos

Leidos

Support Leidos’ NASA IT mission by managing mobile environments across Intune, Apple, Google, and Samsung platforms. Help deliver secure device deployments through documentation, testing, incident resolution, and service improvements.

Ашу
Honeywell Aerospace Technologies

Senior Aerospace Software Project Engineer

Honeywell Aerospace Technologies

Lead aerospace software and electronics programs at Honeywell Aerospace Technologies, coordinating project performance, schedules, costs, risks, and technical teams.

Ашу
NuScale Power

Manufacturing Engineer II, Nuclear Instrumentation and Controls

NuScale Power

Oversee supplier manufacturing of nuclear instrumentation and control systems and electrical components. Support NuScale’s small modular reactor technology through technical, quality, and supply chain coordination.

Ашу
Ford Motor Company

Powertrain Manufacturing Engineer, Ford Motor Company (Hybrid, Dearborn)

Ford Motor Company

Improve tooling, automation, and electrified rotor production at Ford Motor Company. Support supplier integration, plant launches, and manufacturing performance in Dearborn.

Ашу